PTFE impregnated glass fabric, flame resistant insulated jacket
PTFE impregnated glass fabric, coated with both side Fluorin(PTFE), has high tensile strength, is UV resistant and Flame resistant, the model number is YS9040HD. The color can be Gray, white, yellow, black, red or other colors.
It is the heat resistant & Corrosion resistant solution for Insulation Jacket!
Applications of Fluorin coated series include wrapping insulation for pumps, filters, exchange, pipeline, valves, freeze protection and so on, it’s wraped outside the insulation blanket, as this fabric is anti-aging, anti-chemical and anti-environment.
Different color is used for different application, such as steam pipeline, oil pipeline or gas pipeline.
Both side PTFE impregnated glass fabric YS9040HD
This fiberglass fabrics YS9040HD is impregnated with excellent PTFE(Teflon). The high temperature resistant, flame retardant, Non-stick PTFE(Teflon) provides improved resistance to abrasion and corrosion, flexing and tear. And fiberglass ensure the high tensile strength of this product.
This product is used for high temperature (600°F) removable insulation jackets for valves, filter, exchanger, pump, piping, flanges and fittings.
The advantages of PTFE coated fabric.
★ Flame Resistant
★ Environment Resistant
★ Chemical Resistant
★ UV Resistant
★ Non-stick surface, good self-cleaning
The Spec of Both Side PTFE impregnated Fabrics
|Basic Fabric||Satin weaved fiberglass||Satin weaved fiberglass|
|Coating||Both side||Both side|
Please ask for other widths
|1500 mm||78.8 inches|
|Coated Weight||650 g/m²||18 oz/yd²|
|Thickness||0.40 mm||0.018 inches|
|Tensile strength||Warp 3572 N/5cm||410 lbs/inches|
|Fill 2679 N/5cm||350 lbs/inches|
|Mullen Burst||455 N/cm²||650 psi|
|Flame Resistant||Char Length 2.54 cm max||Char Length 1 inch max|
|Afterglow 1 second max||Afterglow 1 second max|
|Flame Out 1 second max||Flame Out 1 second max|
|Temperature resistance||-70 to +315 °C||-100 to 600 °F|
|UV Resistance||1000 hours; no change in tensile||1000 hours; no change in tensile|
Click here to download the spec of YS9040HD-ESONE
Why use Insulation jackets?
This Insulation jacket will lower the thermal energy waste greatly, and also protect the equipment from any chemical corrosion.
This Insulation blanket is cost-effective, energy-save, safe, and reusable solution for all thermal purposes, such as pipeline, valves, filters, exchange, pump systems and so on.
This PTFE impregnated fabric is different from normal PTFE fabric, it is much more flexible and get a better dimensional stability and durability.
The fabrics can be single side or double side coated as required. Color can be red, yellow grey, white…etc.
The installation way of the Insulation jacket is as follows.
Operating at 600°F and up
Inside Jacket: Flat Stainless Steel Mesh
Outside Jacket: 16.5 oz One side PTFE Impregnated Fabric, or 18 oz Both side PTFE impregnated Fabric.
Liner: 18oz Silica Fabric
Liner: Crimped .011 Stainless Steel Mesh
Insulation: E-Glass Fiberglass Fabric
Fastening: 1″ Straps and Stainless Steel D-Rings
Fastening: 3/16″ Braided Kevlar Drawstrings
Fastening: 12ga Stainless Steel Lace Hooks and Quilt Pins
Thread: Kevlar Thread
Application of PTFE coated fiberglass fabric
Thermal Insulation blankets are designed for Pumps, filters, exchange, pipeline, valves, freeze protection and so on.
And different color is for different application, like Yellow insulation jacket is for Gas, Oil and Steam value, pumps and so on.
Valve Insulation Jackets could also be used for making Antiseptic Insulation Tent, which could be used to store chemicals(especially for flammable and combustible chemicals), or easy-corrosive, hazardous article.